Re: AD9513 jitter
Hi Maxime, What you are asking for is simply not possible with the AD9513 or any clock buffer for that matter. If you are trying to clean up jitter on a clock, the only way to do that is to use a PLL....
View ArticleADV7627 audio question
Hello EZ Support:What does the ADV7627 do with the audio as it comes in from the HDMI input? Don't see that in the datasheet.Thank you,Frank
View ArticleRe: ADV7619 for 3D
Do not know the AD7619, wish someone from AD will help with this device or will show some application notes links, have an issue to create a 3D image from 2 PAL cameras can this device or other help...
View ArticleAD9272, HSC-ADC_EVALCZ output signal from debug port
Then I think I have to generate some signal from debug port in HSC-ADC_EVALZ board.Is it possible to make some signals to debug port by modifying VHDL codes?I would like to make some pulse signals...
View ArticleRe: ADV7619 for 3D
HDMI 1.4b standard defines how 3D is packaged in one frame. The AVI infoframe contains the packing information that is sent to the sink. The sink, of which the 7619 is only a receiver, must then...
View ArticleClik here to view.
Re: ADV7627 audio question
The ADV7627 and either: 1) Extract the audio from the incoming video via Digital Audio Output Port2) Pass the audio from the input to the output3) Insert new audio into the output stream via the...
View ArticleRe: How to communicate with ADE7754 to make an energy meter with PIC18F2520
Hi MARS Yes. Please ground neutral directly and connect a RC filter to VN. Refer to my earlier diagram in this thread. There should be a ground symbol on the neutral wire. Regarding the burden...
View ArticleRe: Dolby 5.1 and DTS 5.1 decode license info
Hello Frank, I searched the Engineerzone archives for more information. This one post explains part of the process: https://ez.analog.com/message/8211#8211 So it looks like you will have to start with...
View ArticleRe: AD8318 overshoot problem
What is the output voltage at -35 dBm? It should be in the 1.35 V range (+/- a few hundred mV for your particular frequency). What sort of measurement are you doing when the output inverts? A RF...
View Articleadv7511 on another fclk
I'm trying to incorporate the adv7511 mini-itx project with a pcore I bought from a 3rd party. This core and associated Linux driver require that it use fclk0. However, if I move all the adv7511 and...
View ArticleRe: Problem of ADAU1401 working at 192kHz sampling rate
hello, I assume you are using SigmaStudio to program the part?If you are then make sure you change the sampling rate up in the menu bar of the program. Then compile/link/download. If that does not work...
View ArticleRe: Changing register value via AES3 for ADV8005 Eval board does not take effect
Our software driver for the EVAL-ADV8005-SMZ will allow you to upscale/downscale the video output for the ADV8005. It accomplishes this by routing the video through the PVSP and programming the PVSP...
View ArticleRe: Changing register value via AES3 for ADV8005 Eval board does not take effect
No. Could you please let me know how to license it?
View ArticleRe: ADE 7880 response time - rms value
Hi Bastler We typically recommend the following approach for reading RMS registers and comprehending them accurately: 1. When testing, change the inputs, wait for the readings to settle ( you need not...
View ArticleChanging register value via AVES3 for ADV8005 Eval board does not take effect
I'm working on ADV8005 evaluation board with AVES3 software tool. The intention is to output 4kx2k video with special timing info via HDMI output. It seems I'm able to change registers' value on AVES3,...
View ArticleClik here to view.
Re: Changing register value via AVES3 for ADV8005 Eval board does not take...
Absolutely. I will send you an email with more details. Can you mark this thread as answered since the original question was answered? -Matt
View ArticleAD9361 Calibration Guide references evaluation software
AD9361 Calibration Guide references evaluation software. This document states (page 3) "example scripts generated from the AD9361 Evaluation Software". What evaluation software are you referring to?...
View ArticleRe: How do i set 720p 30fps in adv7181c?
i have 720p30 camera, and it is ok. but i couldn't set adv7181c register values with 720p30, i set it with following values:i want to modify these setting to 720p30. ##CP 720p##:720p/60Hz YPrPb In...
View ArticleAUXADC AUXDACx Disables in No_OS Driver
Is there an easy way to disable the AUXADC, AUXDACx and GPO in your No_OS driver? We have nothing connected to those output/inputs on the AD9361? Thanks RJ
View ArticleRe: AD7794 Evaluation Kit LabVIEW Source Code?
Hi Chris, I am evaluating the AD7794 for a multichannel control application. I am intending to slave one EVAL-7794 to another to achieve synchronous sampling. My problem is controlling the boards....
View Article