Re: ZC702 / AD-FMCOMMS4 No OS System Modification Question
Darren: For those just getting familiar with things, we normally suggest using the Linux / Zynq design first. It's a little easier to use and interact with the AD9361 on either the fmcomms2 or 3. Once...
View ArticleRe: DAQ2 AD9680 Xilinx JESD204 Core
Peter: An eval version of the license is available. You don't need to purchase it to try things out. (Only to go to production). - Robin
View ArticleRe: ADIS16448 can't return ID during one read
Hello zhai_mI am also working with stm32f407 & trying to read the ADIS16448Since you have experience now in reading ADIS via stm32, I want to ask you if possible, to explain me what is the best...
View ArticleADAU1979 PLL and serial audio port clocks
Dear Experts, I am planning to use the ADAU1979 in an unorthodox manner. I would like to use asynchronous sources for the serial audio port clocks(LRCLK, BCLK) and the PLL MCLKIN. Is it possible at...
View Articleadi_update_tools.sh failure due to out-of-date Linux filesystem
adi_update_tools.sh script fails unless/until the filesystem is upgraded to 2014_R2-2014_12_12.bin using the procedure outlined here Linux Download and setting up the image [Analog Devices Wiki]
View ArticleClik here to view.
Re: AD9858 -Microcontroller No-OS Driver
Hi LouijieThanks for your Reply Actually we want to drive this DDS Chip by Xilinx FPGA .we need coding in VHDL or EDK C.like this ADF4118 - Microcontroller No-OS Driver [Analog Devices Wiki].Thanks...
View ArticleRe: Evaluation board EVAL-ADV7612-7511P
The scripts only handle configuring the devices in a static mode for various formats. EDID and HDCP handling is a dynamic process which the embedded 'repeater' code handles. To get the 'repeater' you...
View ArticleAD7856 Calibration mode and test mode
Hi , My customer is using AD7856 now, They don't know when they should use Calibration mode and test mode, And there are no more detailed description about test register and calibration...
View ArticleRe: AD7794 Evaluation Kit LabVIEW Source Code?
Dear Chris,I'd be interested to the Labview source code and/or libraries to make the eval board work in my Labview program.May You send me any information/material/link?Many thanks in advance!David
View ArticleClik here to view.
Re: ADN4605 - External Update pin doesn't operate as specified
Hello Jarrod I update the recommended timing (with extra more) , but without any result . The hardware UPDATE is still not working. I add signal capture : CS – Yellow SCK – Blue SDI – Pink UPDATE...
View ArticleZedboard ADV7511 HDL reference design - Vivado
Analog Devices provided the reference HDL design for ADV7511 for zedboard for Vivado.I downloaded the designs fromhttp://wiki.analog.com/resources/fpga/docs/hdl#building_on_vivadoThen, when I built the...
View ArticleRe: ZC706 will not connect to AD-FMCDAQ2-EBZ
Brian: Glad things are working - but would like to understand the difference. Can you run 'uname -a' on both working, and non-working? Thanks.
View ArticleRe: AD9361: how can receive in a file a bitstream
It depends on what you are trying to do. If it's just measure bandwidth -- dump things to /dev/null with dd, and see if the data rate matches. -Robin
View ArticleRe: AD9364 Tx monitor gain settings
Robin, Thank you for your help.What I'm really looking for is the correct way to enable/disable the Tx monitor function in TDD application. The UG-570 document is very unclear in that regard. Who can...
View ArticleClik here to view.
Re: GPIO to control EQ
Hello izhmel, It appears we have already taken this further than it makes sense to go. My pretty panel picture above notwithstanding, any three-filter EQ based upon state-variable filters...
View ArticleRe: AD9129 DLL Incorrect Phase
The SED test is used mostly to determine correct connectivity (opens/shorts) for the DAC. For timing errors, you need to use the data receiver status registers. Could you give more details about your...
View ArticleRe: A suitable interface device for AD7762
Hi Jonathan Thank you very much for ADG3231 information.On what kind of standard is this interface based?For example, when connecting with a controller, how does it usually connect?(e.g. what V is...
View ArticleRe: Suggestions for video encoding: BF561 dual core processor
Moved to Blackfin forums where they are more likely to know the answer than in Video. Dave
View ArticleRe: AD9129 miscellaneous questions
Here are some answers:- Sure, it just lowers the HPF pole.- Yes, they are LVDS-compliant.- Per the spec in the data sheet table 2.- You can do either.- Please check the schematics again. There are many...
View Article