Quantcast
Channel: EngineerZone: Message List
Browsing all 22030 articles
Browse latest View live

Re: AD8302 Phase error measurement

Dear Mr.Joel Thank you for your prompt support.And sorry for my poor understanding.Could I ask some points? Regarding input level,I could not find the description about the input level in "Less than...

View Article


Re: size of board EVAL-AD5754R

Hi Serg_R, From the size of the AD5754R, I'm estimating the board's dimension to be 130mm X 65mm. I would be confirming this once I get access to layout files of the board. Regards,Mark

View Article


Re: QPSK GENERATION (MATLAB HDLCODER)

That depends on how you are generating the samples.If you can provide the 4 samples in parallel at the rate you desire - you can simply connect it the core.If not, you need to lower the sampling rate,...

View Article

Re: interrupt nesting and poriority

hi i 'm using 21489simply put i want 2 priority level like:level 1 : FLAG0level 2 : DAIH DAILis this possible?

View Article

Re: AD5372 Application Note

Hi wcgood, Although ADI DACs offers high-speed and precise conversion of data, they are not sensitive PCB layout. The large number of channels would affect on the difficulty of routing the signals...

View Article


Re: linux driver for adau1381 codec

Hi Lars,How do I create firmware file for adau1381 that can be used by the Linux driver?. I read about gen_firmware utility, however SigmaStudio appears not being able to generate parameters.bin and...

View Article

SNMP on bf 537 stamp

hi  i have ported uclinx on bf 537 stamp board. i am facing problem  regarding installation of SNMP package on the board. How it will compile ?? how we can use our board as a snmp server (snmpd) or...

View Article

Re: AD9361 API Driver Implementation in Spartan 6 using MicroBlaze

Hi Alex, Am about to modify the design. I wanted to confirm things before i could remove the DDR, ethernet, iic and other stuff. I don't have a DDR attached with my spartan 6. Does the actual driver...

View Article


ADV7611: HDMI input signal is not detecting

Hi, I am using below mentioned chips and configuration for HDMI. ADV7611 - HDMI Receiver ADV7513 - HDMI Transmitter HDMI Receiver input signal is generated from PCIe based HDMI/DVI adapter card. HDMI...

View Article


Re: EVAL-AD9833 board

Ok I will do it because right now I am out of my lab.... I will do it and get back to you as soon as possible.

View Article

Re: SNMP on bf 537 stamp

thanx Aaronwu for your guidance. finally i got my mistake and  able to do uclinux compilation with snmpd and ported it to stamp board. Board is responding to snmp client i.e.# snmpwalk -v1 -c public...

View Article

what's the difference between the application for sigma studio version of...

Developing ADSP-21489 with sigma studio,I have developed a project of sigma for sharc 2.0.0 in CCES,and all are fine with 48kHz sample rates.But problems come up in the sample rates of 96kHz with...

View Article

Re: ad7730 problems.

Hi wsurferw, The 25% of FS reading suggests that your inputs might be playing around the full scale. What is the expected range of the resistor bridge as inputs to AD7730? I assume this is 0 to 10 mV...

View Article


Image may be NSFW.
Clik here to view.

关于AD9222评估板和HSC-ADC-EVALC数据采集板使用问题

各位好,我正在使用AD9222评估板和HSC-ADC-EVLAC数据采集板,现在碰到了如下问题,希望能帮助解决。        我将两块板子如附件图1中所示连接了起来,用电脑和数据采集板连接之后,使用Visual Analog 软件无法获取到数据。      同时,当我运行SPI controller软件的时候,打开时发现碰到了如图2所示,但是我板子已经连接好。...

View Article

Interfacing ADC

Hello,Our Customer has asked that to provide input interface and output interface of Analog's few ADC. But for an ADC device, there is no interface at input side. Can you help me to get what is meaned...

View Article


ADM811 resistive divide usage

HiADM811 is very low consumption current device.Can ADM811 use resistive divided input?I would like to spend 1mA for resistor.(input voltage is 24V, 100uA enough?) ADI has more suitable device, I...

View Article

Glitch Area

Hello,How can i get Glitch Area for an ADC AD9235BRUZRL7-20, AD9235BRUZRL7-40, AD9235BRUZRL7-65

View Article


ADV7850 HDMI input, need I2S pin output

Hi Sir, We have an ADV7850 EVB and verified HDMI input / HDMI output. The audio is normal and can hear from HDMI display, but when we probe the I2S output pin, can't see the output waveform in scope....

View Article

Data of temperature drift about ADV7393

I'm searching some data of temperature drift about ADV7393.If you have any data of temperature drift about ADV7393, is it possible to show me ?

View Article

Re: AD8302 Phase error measurement

Dear Mr.Joel  Thank you very much for your support.I checked the stand-alone feature.sorry I couldn't show actual data.It is good shape except 80 to 100 deg.I beleve around 90 deg is best shape....

View Article
Browsing all 22030 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>