Quantcast
Channel: EngineerZone: Message List
Browsing all 22030 articles
Browse latest View live

Re: FFT codes for software

Farid: Is is off-line. We stopped using it, and it's not included in our Zynq designs anymore. We found the software only version of FFTW to be faster on the ARM A9. (adding the FFT, caused timing...

View Article


Re: Capture Data with AD-FMCOMMS1

What version of things are you running? We can do more than this on the Zed designs - but they have been updated a little more than the fabric only solutions. If you are running into a bandwidth issue...

View Article


Re: RF driver

http://wiki.analog.com/resources/tools-software/linux-drivers/iio-transceiver/ad9361 -Robin

View Article

Re: FMCOMMS1 Sync

What is your base platform? I think this has only been done on a ML605. -Robin

View Article

AD22151

Hi I noticed that the AD22151G sensor is magnetic - it's attracted to our magnet. What part of the sensor or package is magnetic/ferritic? How will this affect magnetic field measurements? RegardsKeir

View Article


Re: Capture Data with AD-FMCOMMS1

Thanks Robin for your fast reply. I'm using ML605 revE (with 1GB DDR3-RAM 512MB used), ADI-FMCOMMS1 revB, and no-OS software latest version from gitHub. I think I don't any rate issue, since it's ok...

View Article

AD9963 ADC Latency

Hi, I appreciate if some one can tell me the delay from the sampling of receive signal to the time presented to the TRXD.  It is unavailable in the datasheet. ThanksHenry

View Article

Re: Maximum current --ADV7619

Hello, GuenterL-san. Oh, I missed it.I'm sorry for bothering you. Kikka

View Article


Re: ADV7511 and ADV7612 with WUXGA

Do you have EVAL-ADV7612-7511 (HDCP-enabled) or EVAL-ADV7612-7511P (non-HDCP)? -Matt

View Article


Re: Enable of ADL5330

Hello enash-san, Thank you so much for information. Sincerely yours,Kou

View Article

Image may be NSFW.
Clik here to view.

Re: How to Calculate MOD and FRAC values for ADF4351 manually?

Take a look at RF SYNTHESIZER - A WORKED EXAMPLE on page 21 of the ADF4351 data sheet: http://www.analog.com/static/imported-files/data_sheets/ADF4351.pdf#page=21 Or maybe take a look at the ADF4351...

View Article

Re: Aux ADC value settling time

Hi Christian, The interface registers are only accessible by special GPIO conditioning blocks and they are written/read by the hardware writeback function, so I don't think these would serve your...

View Article

Re: ADV7181D : Color Space Conversion Matrix

Hi Matt,  I am working with Jeff Saarela in the application of the adv7181D.  WE got the color space conversion to work when processing interlaced component RGB video (PAL RGB and RS170 RGB, each with...

View Article


Re: DC Coupling ADL5565

Hope Holidays went well. Looking forward to a response, more information on distortion etc... operating with VICM and VOCM being different or a way to operate optimally when DC coupled... My guess is...

View Article

Re: ADAU1761 Linux Device Driver for kernel v3.8

I have gotten around the firmware blob issue. Just pulled the dummy firmware blob from the ADI zynq_audio branch and configured the kernel to build the blob into the kernel image form the firmware...

View Article


Using ADIS device for rollover control device.

  I am looking at using your product to make a semi-active suspension rollover control device for a heavy SUV. Was wanting some information on what your product produces to help accomplish that goal....

View Article

Re: VisualDSP automation - Masking Interrupts

Hello, The issue is that we only read the target options from the registry at startup and then we use a local copy inside our library.  Whenever you change the target options dialog and select OK we...

View Article


ADV7623 design collateral

Hello:I am looking for any design collateral that is available to aid in my design with the ADV7623.  Is there a support wiki page?  A reference design would be the ultimate but will take anything that...

View Article

Re: AD5684 Power Management

Hi ddarko, The Vlogic pin of the AD5684 is the “Digital Power Supply” which powers up the digital block of your IC. It also sets on what level your digital communication line will be. The usual Vlogic...

View Article

Re: ADV7623 design collateral

Have you seen the ADV7623 Design Support Files FAQ? http://ez.analog.com/docs/DOC-2573 It has some good information. -Matt

View Article
Browsing all 22030 articles
Browse latest View live