Quantcast
Channel: EngineerZone: Message List
Browsing all 22030 articles
Browse latest View live

Re: Early termination of SPI using burst mode reads in an ADIS16364

We appreciate you offering this to us.  In past inquiries, we have discouraged this practice but since I had not tested this approach personally, I was hesitant to offer the same level of conviction....

View Article


Re: updating the SD-card - re-submitted

Robin, I tried another computer (Windows) for creating the SD-card and it fails in a similar way: the process of "physdiskwrite" stops after just a couple of minutes with an error message (the error is...

View Article


Re: Help to clarify the SPI slave description about the SPI_TWC on bf609 HRM

Hi Dell, Yes..info on p1531 is correct: the counters should not be enabled when SPI is configured as slave (although there is no hardware restriction). The info on p1518 needs to be modified. What kind...

View Article

Re: cf_adv7511_zed - "axi_hdmi_tx_v1_00_a was not found - please see console...

Sorry for the delay, for some reason we did not get an email about this question. Did you make any progress so far? Do you still have the same issue? I already forwarded this question to someone who...

View Article

Re: AD-FMCOMMS2-EB and ZC702 Board

Did you post this question somewhere else? Are you still looking for an answer? Charly

View Article


Re: Request an a/d converter with a Clock Output

Hi Timo, The evaluation board schematic is contained within the UserGuide, which can be found at http://www.analog.com/static/imported-files/user_guides/UG-003.pdf . Please take care. Doug

View Article

Can a video decoder sample asychronously (not line locked)?

I need to digitise 4 composite videos and TDM them for transport. To TDM them, they need to be of the same clock domain. I do not want to implement a frame synchroniser for each of these videos. My...

View Article

ADISUSBZ with ADIS16362 Gyro Data??

Just purchased and received an ADISUSBZ and ADIS16362 module. Utilizing IMU_6DOF (Ver 3.0) I do not see any changes on the Gyro plot display. All plot axis, for the Gyro, are enabled.  The...

View Article


Image may be NSFW.
Clik here to view.

How to deal with these two errors in CCES?

Hi everyone,    I have built an application for 21488 by imitating the sigma studio application for 21489.The modification I take is to correct the “ldf” file to fit with the 3Mbit on chip ram of...

View Article


ADV7511 in board, how to change the channel of I2C bridge

    We select different I2C channel in our board with KC705 development board. I changed the I2C ouput in i2c_axi.c( note: Qlf ) and add i2c_axi.c and  i2c_axi.h in \\SDK_Workspace\sw\src. And I add...

View Article

why I can't use Project Wizard to create correct "LwIP Ethernet application"?

hi guys,i need to write a LwIP Ethernet application on ADSP-BF561 EZ-KIT Lite Evaluation System Rev1.3 and Blackfin USB-LAN EZ-Extender Rev1.2.  IDDE is VisualDSP 5.1.When i run the example in...

View Article

Modify+Rebuild reference design of AD9739A

Hello all, I am rebuilding the system.bit file from XPS and when I program the FPGA in SDK and I run it, I get an error(attached). I am using 14.4 version.The default bitstream is generated using 14.1?...

View Article

Re: Arduino UNO & ADXL362 problem

Hi Gsterken, To get the valid acceleration from the ADXL362, you need to enable it firstly by writing 0x02 to register 0x2D (POWER_CTL).  I would suggest you to read DEVID_AD, DEVID_MST, PARTID firstly...

View Article


Re: AD5933 and AD5934 evaluation board software commands

Thanks a lot for this post. I am trying to access AD5933 under Linux using EVAL-AD5933EBZ, would you please tell me the equivalent of Vendor_Request function in cyusb lib, please the same example of...

View Article

Re: Distorted color in HDMI transmission

No, we don't have the evaluation board. I am attaching a block diagram of our project for better understanding. The script I am using for ADV7612 is "6-1f" from the default scripts of Analog Devices....

View Article


Image may be NSFW.
Clik here to view.

ADV7180->480i->ADV8003 odd-even field issue

Continue below customer's issue, http://ez.analog.com/thread/42117, I have come to field to check the issue. Basic connection is ADV7180->480i=>ADV8003=>SD encoder=>LCD display and TTL...

View Article

Re: How do you synchronize conversions from 2 AD7799 converters

Thanks for all the answers.  I have tested the idea of writing to the registers of both at the same time to set mode and start conversion followed by individual data reads.  With the ADCs sampling at...

View Article


Re: AD5933 and AD5934 evaluation board software commands

And using <libusb-1.0/libusb.h> please.

View Article

multiple audio codec naming adau1761 driver

Hi, How can we give different `card names` (not different ids by udev intereface) to multiple ADAU1761 codecs in Linux? I think the driver  will give constant name to all devices by looking...

View Article

Re: ADAU1761 name

Hi larsc, In my custom board based on the zedboard, i have 2 adau1761, i will use the driver of adau1761, can i use the 2 codec wiyh different names by editing the driver?

View Article
Browsing all 22030 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>