Quantcast
Channel: EngineerZone: Message List
Browsing all 22030 articles
Browse latest View live

Re: How to port map to DMA interface?

It is a FIFO- (search for FIFO interface) dac_drd  - use it to increment your FIFO read pointer.dac_ddata - pass FIFO output to this input (latency is tolerated)dac_dvalid - 1'b0 is good...

View Article


ADSP-21369 EZ-KIT & I2C

Hey there, I've written a code to communicate with a RTC via I2C but I can't seem to get it working. Using the osciloscope I can see that the CLK signal only outputs 2 bits... When I changed the slave...

View Article


Re: AD-FMComms2 HDL support for Altera FPGAs

Yes - and I forgot that you are interested in Altera. Since Vivado allows us to get out of the "EDK structure", the same library will be used in Altera carriers also (hopefully both can get along well).

View Article

FMCOMMS1-EBZ share memory address in verilog

Hello, I work on ZC702 plus fmcomms1-ebz and no-os drivers. I know that if we define a share memory in simulink, its address will come in "xparameters.h".I want to understand how is a share memory is...

View Article

Re: AD-FMComms2 HDL support for Altera FPGAs

cool - is there a schedule for any of these releases (Quartus or Vivado)?

View Article


Power on AD-FMCOMMS2-EBZ from ZC702

After debugging it looks like the power rail for the xcvr chip (ad9361)on the eval board is not getting the power good signal (PG-FMC) from the ZC702 board (should be asserted highand it’s not). As a...

View Article

Re: Power on AD-FMCOMMS2-EBZ from ZC702

First, confirm the following: Look at message #9 - http://ez.analog.com/message/80166#80166

View Article

Re: Power on AD-FMCOMMS2-EBZ from ZC702

Hi, Can you check whether your ZC702 is affected by this AR #51438. Check if DS13 and DS24 light up. If they don't you need to reprogram the power supplies on your ZC702. - Lars

View Article


Re: how to regenerate IP cores from core generator and rebuild the...

Go through this? http://ez.analog.com/message/133039#133039

View Article


Image may be NSFW.
Clik here to view.

Re: AD1937 input into ADAU1442?

Hi Dave, Thats not good news i don't see anyway i can change the clock inputs on the finished PCB without re designing and having new boards made. Would it be better to make the 1937 run in slave mode?...

View Article

Re: External clock for ADIS 16448

Were you able to get all of this working and achieve proper signal processing at 500SPS for your system?

View Article

Re: AD5933: Can “Settling Time Cycles” register value be 0?

Hi Snorlax, I typically differentiate between AFE and external AFE.anyway, I would like to apologies, I didn't see that your excitation frequency is 3kHz.  You have two problems,Your frequency is too...

View Article

Sensing mechanical equipment vibration

NevadaMark,Thanks!I read this article: ANALOG DEVICES’ MEMS WIRELESS VIBRATION SENSING SYSTEM ENABLES REMOTE MONITORING OF INDUSTRIAL MACHINE HEALTH It specifies the use of Sensor node (ADIS16229)...

View Article


Re: ADV7343 - PAL60 CVBS output

Hi, I'm still having trouble with PAL 60. When I set it up I get several black lines towards the top of the screen. Later lines have corruption as well. The location of the black lines is repeatable...

View Article

Re: AD1937 input into ADAU1442?

I will check on a work around. No, slave mode will not help. I will need a little time to look into this. I will get back to you with more info as soon as I can.Thanks for your patience, Dave T.

View Article


Image may be NSFW.
Clik here to view.

ADI PLL Int-N v7 software

This software supports: ADF4001, ADF4002, ADF4106, ADF4107, ADF4108, ADF41020, ADF4110, ADF4111, ADF4112, ADF4113, ADF4113HV, ADF4116, ADF4117 and ADF4118. Operating systems: Windows XP, Vista and 7...

View Article

Re: AD1937 input into ADAU1442?

Thanks Dave,  The slave mode was a real easy fix as its just a case of removing the solder between the 2 pins on the 1937. Its frustrating that this was missed under the schematic review but I guess...

View Article


Re: AD-FMCOMMS2-EBZ Reference Design

Hi Dragos,    Thanks for the update. I am now seeing a new couple of errors while building the project. I am attaching a screenshot of the errors. Could you please help out with this issue?...

View Article

Re: Sensing mechanical equipment vibration

Great article!  The author is my colleague and one of the primary visionaries for this entire product family.  I suspect that 18g is going to be a good place to start.  The ADXL326 would be a good...

View Article

Re: in and out impedance

Hello Jim, The ADuM344x inputs are CMOS gates, so the impedance is high. You may wish to terminate the line externally if you're concerned about signal integrity.  The output impedance is approximately...

View Article
Browsing all 22030 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>