Re: NO_OS AGC Settings
Kelly, In this case, channels are 0 and 1. Sorry for confusion. We will try to use the same numbering for all the functions.Thanks,Dragos
View ArticleRe: ADV7441A questions about automatic mode
Hello Matt,I was mistaken, they use these on an older design that they need for a new customer and can't change the board. Thanks,Frank
View ArticleRe: AD9361 - IIO Oscilloscope
What board are you using? Are you sure that you are within the balun passband?
View ArticleRe: About the noise of ADAS3022
Hi, Yuji. I don’t see ripple like the one on the scope shots when I tested it on the lab. What input source is being used? When they removed the RC filters, did they probe directly on the input pin?...
View ArticleRe: FMCOMMS1 BPSK modulation
Hi Csoml, For BPSK modulator,i know have only one output,like +1 or -1.(continus)The BPSK data would feed the one channel of DAC.Why do you say have an I and a Q output for BPSK? Thanks.Chris
View ArticleHow to identify which filter is which on
I have created a project that has several identical channels, each with several identical filter bands. (Filters->Second Order->Double Precision->1 Ch->Medium Size EQ) The spi_map.dat file...
View ArticleClik here to view.
problem with interfacing arudino uno with ADIS16480
i tried to interface Arudino with ADIS16480 through SPI. when i read the sensors like gyro,accelerometer ,barometer,temp,barometerusing arudino i will get some data which remains constant even when i...
View ArticleHigh Speed DAC
Hi, if I buy the AD9142 in tested wafer form, and want to assemble it on my own package layout, will I need to do special "trimming" procedures (like efuse....) after the packaging process ? If yes,...
View ArticleClik here to view.
Re: edit hardwareconfiguration in graphical sigma studio?
Hello hubijo, You can change the 12th bit (D11) in register 2078 (hex 081E) first by selecting the HW Configuration window and the 170x\140x Register Control tab, which brings up the view shown...
View ArticleRe: How to identify which filter is which on
Hi Mark: I believe the addresses assigned are present in a couple of different files. Some of those need to be generated post compile by pressing the button that generates microcontroller export files....
View ArticleRe: ADL5511 EVALZ Getting Started
I figured out what's the problem An AC coupler needs to be connected at the output. Otherwise current pulling will exceed the limit.
View ArticleRe: Boot DSP
Thank you very much for your comments, Miguel and John. I have added some delays and tried with different delay time, but it doesn't help.I have noticed that SigmaStudio generates different functions...
View ArticleRe: Pulse Generator Circuit
Hi Rich, Your application is really interesting. So I have few more questions to ask from you. 1. Can you tell me more details on how you will use the pulse generator circuit in energy research?2. Do...
View ArticleRe: How to identify which filter is which on
Miguel: Thanks, I was unaware of the extra step to export much more detailed files for other processor support. I found it under menu "Action"->"Export System Files" I see there is also a tool bar...
View ArticleRe: IF output range of AD 8342
Dear Benjamin , Thanks for the reply .My requirement was actually to convert the balanced output of AD 8342 to single output which would be fed later to a filter ,, however the transformer TC1-2T as...
View ArticleClik here to view.
Re: AD8036: need clarification on "fast rectifier" use.
Hi Ilya, Sorry for the delayed response. 1. First, the datasheet theory of operation (pg. 15, paragraph 2) says that AD8036 and AD8037 can be used in either inverting or non inverting...
View ArticleRe: AD9361 REF_CLK
Hello Charly, no, I do not need to know it. It is just that the datasheet should give that information.Noone can ensure to provide exactly 1.3V. Therefore min. and max. values should be statedin the...
View ArticleRe: [ADV8003] Question about Scaling, De-interlacing & PtoI
Hi Shogo, This is the update from designer for the previous thread 2nd question Q2 : We assume that above conversion process requires dedicated memory inside of ADV8003. Is this right understanding ?...
View ArticleRe: [ADV7282-M] There are no models for MIPI CSI-2 Tx pins on the IBIS model.
Hi Tamu, Currently we do not model the MIPI pins in the IBIS model.Within the IBIS model, MIPI pins are not easily supported in the IBIS file structure and can cause errors for compilers. Currently...
View Article