Re: Register setting of ADV7513

Hello mattp,

Signal that we are assuming the input is below.

VESA compliant
1920 x 1200 @ 60Hz CVT(Reduced Blanking)

1680 x 1050 @ 60Hz

1600 x 1200 @ 60Hz

1280 x 1024 @ 60Hz

1280 x  768 @ 60Hz

1024 x  768 @ 60Hz

800 x  600 @ 60Hz

EIA/CEA-861 compliant

1920 x 1080p @ 59.94Hz

1920 x 1080p @ 50Hz

1920 x 1080i @ 59.94Hz

1920 x 1080i @ 50Hz

1280 x  720p @ 59.94Hz

1280 x  720p @ 50Hz

720 x  480i @ 59.94Hz

720 x  576i @ 50Hz

SQUEEZE is a video that has to 4:3 from 16:9 by the reduction in the horizontal direction.

It return to 16:9 in monitor side.

Resolution is "720 x 480i" and "720 x 576i".

When we enter this signal, please teach me the setting of 0x17(Aspect ratio).

Because Original SQUEEZE is 16:9, we should be set 16:9?

OR

because output resolution is 4:3, we should be set 4:3?

Thanks,

Tak